DSpace Collection:https://elibrary.tucl.edu.np/handle/123456789/1252024-03-29T17:26:52Z2024-03-29T17:26:52ZSynthesis, Characterization, and Antibacterial Evaluation of Metal Complexes of Surfactant Based Schiff BasesAdhikari, Janakhttps://elibrary.tucl.edu.np/handle/123456789/222042024-03-28T21:19:49Z2024-03-01T00:00:00ZTitle: Synthesis, Characterization, and Antibacterial Evaluation of Metal Complexes of Surfactant Based Schiff Bases
Authors: Adhikari, Janak
Abstract: Modern pharmaceutical science needs more efficient drug delivery systems (DDSs) that permit poorly aqueous soluble drugs to work effectively. Consequently, medications function effectively. Pharmacological science has found Surfactants to be an invaluable alternative for enhancing the potential of conventional drugs and improving the efficacy of drugs with poor water solubility. Solid drugs can be solubilized more easily when surfactant molecules are added and membrane permeability can be increased in lipid layers as a result.
In the last few years, the synthesis of transition metal complexes of Schiff bases has drawn a lot of interest as an alternative to coordination compounds for the creation of chelating agents. Metal chelates have suitable biological activities.
This research aims to design and develop surfactant-containing Schiff bases and their metal complexes, which can serve as a drug to solve the problems with antibiotic resistance and drug delivery. The study has focused on the structural modification of compounds under study (Pyrrole-2-carboxaldehyde, Pyrrole-3-carboxaldehyde, and Dodecylamine) by forming the Schiff bases and metal complexes and their correlation with bio-functional activities. Given this, two new Schiff bases [DDAP2C and HL (DDAP3C)] have been prepared and further complexed with four transition metal ions, Co2+, Ni2+, Cu2+, and Zn2+. The newly prepared metal complexes and Schiff bases were fully characterized by elemental microanalysis, conductivity measurement, melting point measurement, 1HNMR, 13CNMR, FT-IR, UV/Vis, ESI-mass, MALDI-TOF-mass spectrometry, and magnetic susceptibility, studies.
The conductivity data were used to calculate the synthesized compounds' critical micelle concentration (CMC), which was further utilized to derive the Gibbs free energy of micellization (ΔG°m). Thermal stability and kinetic properties of the complexes were determined using thermogravimetric and differential thermal analysis (TGA/DTA). The Coats-Redfern method was used to extract thermodynamic parameters that describe the kinetic activity of the complexes. Most complexes showed high thermal stability and non-spontaneous decomposition steps.
The powder X-ray diffraction study was conducted to verify the crystalline nature of the complexes. The Origin and X'pert high score software were used to analyze PXRD data, and the diffractograms were carefully analyzed to get information about the nature of complexes. Most of the complexes were found to crystalline with nanocrystalline size.
Scanning electron microscopy (SEM) studies enabled the characterization of the surface morphology of Schiff bases and complexes and revealed their different surface textures. Molecular modeling has provided additional support for the geometry of the complexes determined by spectroscopic methods. The structure optimization was achieved by running the proposed molecular structures in CsChemOffice Ultra 16 and Argus Lab 4.0.1 software with MM force field calculation.
The standard Kirby-Bauer paper disk diffusion technique demonstrated the antibacterial potency of the Schiff bases and metal complexes. Several clinical strains of both gram-positive and gram-negative bacteria have been isolated and cultured in laboratories to achieve this objective. They have interacted with synthesized complexes solution prepared in DMSO at variable concentrations. These were further quantified more precisely by performing a minimum inhibitory concentration (MIC) test. In most biological studies, the free Schiff bases and compounds under study were found to have lower antibacterial efficacy than the Schiff base metal complexes. The copper complexes of both the Schiff bases showed excellent antibacterial activity.
आधुनिक औषधि विज्ञानलाई अझ प्रभावकारी औषधि वितरण प्रणालीको आवश्यकता छ, जसको उपलब्धताले खराब जलीय घुलनशील औषधिलाई पनि प्रभावकारी रुपमा कार्य गर्ने बाटो खुल्न जान्छ। परिणामस्वरुप औषधिहरूले अझ प्रभावकारी ढंगले आफ्नो कार्य सम्पादन गर्दछन्। फार्माकोलोजिकल विज्ञानले परम्परागत औषधिहरूको प्रभावकारीता बढाउन, खराब जलीय घुलनशिलता एवम् औषधिहरूको प्रभावकारीतामा सुधार गर्न सर्फेक्टेन्टहरूलाई अमूल्य विकल्प को रुपमा पहिचान गरेको छ। जब औषधिहरूमा सर्फेक्टेन्ट अणुहरू थपिन्छ, ठोश औषधिहरूको घुलनशिलतामा बृध्दि हुन जान्छ फलस्वरुप लिपिड तहहरुमा झिल्ली पारगम्यता बढ्न गई औषधिहरूको प्रभावकारीता बढ्न जान्छ। पछिल्ला केही वर्षहरुमा शिफ बेशहरुबाट धातु कमप्लेक्सहरुको सश्लेषण हुने तथ्यले चेलेटिंग एजेन्टहरूको सिर्जनाको लागि समन्वय यौगिकहरुको विकल्पको रुपमा अधिक ध्यान आकर्षण गरेको छ। धातु चेलेटहरुमा उपयुक्त जैविक गतिविधिहरु विद्यमान हुन्छन्। यस अनुसन्धानले सर्फेक्टेन्ट्युक्त शिफ बेशहरु र तिनीहरुका धातु कमप्लेक्सहरुका डिजाइन र विकाश गर्ने लक्ष्य राखेको छ, जसले एन्टिवायोटिक प्रतिरोध र औषधि वितरणको समस्याहरु समाधान हेतु औषधिको रुपमा कार्य सम्पादन गर्न सक्छन्। यो अध्ययनले शिफ बेशहरु र धातु कमप्लेक्सहरु निर्माण पश्चात, अध्ययनमा लिइएका यौगिकहरुको संरचनात्मक परिमार्जन र जैविक-कार्यात्मक गतिविधिहरुसँग तिनीहरुको अन्तर सम्बन्धका बारेमा ध्यान केन्द्रित गरेको छ। यस तथ्यलाई हृदयङ्गम गर्दै, दुई नयाँ शिफ बेशहरु तयार गरी, तिनीहरुको चार धातु आयनहरुसँग (Co2+, Ni2+, Cu2+, & Zn2+) थप धातु कमप्लेक्सहरु बनाइएको छ। नयाँ तयार गरिएका शिफ बेशहरु र धातु कमप्लेक्सहरुलाई सम्पूर्ण रुपमा Elemental microanalysis, चालकता मापन, पग्लने बिन्दु मापन, 1HNMR, 13CNMR, FT-IR, UV-Vis, ESI-mass, MALDI-TOF-mass Spectrometry र चुम्बकीय संवेदनशीलता अध्ययनहरु द्वारा चरित्र चित्रण गरिएको थियो। चालकता तथ्याङ्क सश्लेषित यौगिकहरुको महत्वपूर्ण मिसेलि एकाग्रता (CMC) को गणनाको लागि प्रयोग गरिएको थियो, जुन गिब्स फ्री एनर्जी अफ माइसलाइजेशन (ΔG°m) प्राप्त गर्न पुन: प्रयोग गरिएको थियो। थर्मोग्राभीमेट्रिक र विभेदक थर्मल विश्लेषण प्रयोग गरेर तापीय स्थिरता र कमप्लेक्सहरुको गति सम्बन्धित गुणहरु निर्धारण गरिएको थियो। कोट्स-रेडफर्न (Coats-Redfern) विधि प्रयोग गरी थर्मोडायानामिक प्यारामिटरहरु निकालिएको थियो, जसले कमप्लेक्सहरुको काइनेटिक गतिविधि वर्णन गर्दछन् । धातु कमप्लेक्सहरुले उच्च तापीय स्थिरता र गैर-स्वस्फूर्त विघटन चरणहरु देखाएका थिए।
पाउडर एक्सरे विवर्तन (PXRD) अध्ययन, कमप्लेक्सहरुको क्रिस्टलीय प्रकृति प्रमाणित गर्न प्रयोग गरिएको थियो। Origin र X’ Pert High Score Software हरु प्रयोग गरी PXRD तथ्याङ्कहरुको विश्लेषण गरिएको थियो र कमप्लेक्सहरुको प्रकृतिबारे जानकारी प्राप्त गर्न तिनीहरुको Diffractograms हरुलाई सावधानीपूर्वक विश्लेषण गरिएको थियो। कमप्लेक्सहरु नैनोक्रिस्टलाइन प्रकृतिका थिए।
स्क्यानिङ्ग इलेक्ट्रोन माइक्रोस्कोपी (SEM) अध्ययनद्वारा शिफ बेशहरु र कमप्लेक्सहरुको सतह उजागर गरिएको थियो र तिनीहरुको विभिन्न सतहगत बनावट पाइएको थियो।
आणविक मोडेलिंगले, स्पेक्ट्रोस्कोपिक विधिद्वारा निर्धारित कमप्लेक्सहरुको ज्यामितीको लागि अतिरिक्त समर्थन प्रदान गरेको छ। CsChem Office Ultra 16 र Argus Lab 4.0.1 Software मा MM Force field गणनाको साथै प्रस्तावित आणविक संरचनाहरुलाई चलाएर, संरचना अनुकूलन हासिल गरिएको थियो।
मानक किर्बी-बाउर पेपर डिस्क प्रसारण प्रविधिले शिफ बेश र धातु कमप्लेक्सहरुको जीवाणुरोधी शक्ति प्रदर्शन गरिएको थियो। यो उदेश्य हासिल गर्न प्रयोगशालामा ग्राम-पजिटिभ र ग्राम-नेगेटिभ व्याक्टेरियाका धेरै क्लिनिकल स्ट्रेनहरुलाई पृथकीकरण एवम् संवर्धन गरिएको थियो। तिनीहरुले विभिन्न एकाग्रता का DMSO मा तयार गरिएको सश्लेषित यौगिकहरुको घोलसँग अन्तरक्रिया गरेका थिए। सश्लेषित यौगिकहरु को जीवाणुरोधी सक्रियता थप सटिक रुपमा न्यूनतम अवरोध एकाग्रता (MIC) परीक्षण गरेर प्रमाणित गरिएको थियो। जैविक अध्ययनहरुमा, अध्ययन अन्तर्गतका यौगिकहरु र शिफ बेशहरु, तिनीहरुका धातु कमप्लेक्सहरुभन्दा कम जीवाणुरोधी क्षमताका पाइएका थिए।2024-03-01T00:00:00ZCorrosion behavior of sputter-deposited W-Mo alloys in NaOH solutionsKhadka, Arunhttps://elibrary.tucl.edu.np/handle/123456789/221092024-03-14T21:20:19Z2010-01-01T00:00:00ZTitle: Corrosion behavior of sputter-deposited W-Mo alloys in NaOH solutions
Authors: Khadka, Arun
Abstract: The corrosion behavior of the sputter-deposited nanocrystalline WMo
alloys
is
studied
after
immersion
for
24-29
h
in
different
concentrations
of
NaOH
solutions
at
25
o
C, open to air by using corrosion tests and open
circuit potential measurements. Molybdenum metal acts synergistically
with tungsten in enhancing the corrosion resistance of the sputter-deposited
W-Mo alloys so as to show the lower corrosion rates than those of alloyconstituting
elements
(that
is, tungsten and molybdenum) after immersion
for 24-29 h in NaOH solutions. In general, the open circuit potentials of all
the examined W-Mo alloys are shifted to the more positive (noble)
direction with increasing the molybdenum content in the alloys. The
stability of the spontaneous passive films of the binary W-Mo alloys is
decreased with increasing the concentrations of NaOH solutions. However,
the corrosion rates of all the examined W-Mo alloys are almost
independent of concentrations of NaOH solutions (that is, 0.01 M, 0.1 M
and 1 M NaOH).2010-01-01T00:00:00ZSynthesis, Characterization, and Biological Investigations of Heteroleptic Complexes of Tetracyclines and Salicylaldehyde Mixed LigandsDev, Rohit Kumarhttps://elibrary.tucl.edu.np/handle/123456789/219582024-02-18T21:18:58Z2024-02-01T00:00:00ZTitle: Synthesis, Characterization, and Biological Investigations of Heteroleptic Complexes of Tetracyclines and Salicylaldehyde Mixed Ligands
Authors: Dev, Rohit Kumar
Abstract: Today, the resistance of bacteria is due to their misuse and overdose of antibiotics. Therefore, researchers are working day and night to discover new antibiotics that can solve the challenges of multi-drug resistance. The present study describes the synthesis of the metal complexes with the help of the primary ligand, tetracycline/oxytetracycline (TC/OTC), secondary ligand, salicylaldehyde (Sal), and 4d-transition metal salts [M=Cd(II), Zr(II), Mo(III)/ Mo(V), and Pd(II)]. A calculated amount of eqimolar mixture of primary ligand (TC) is dissolved in 70 % ethanol and stirred under magnetic stirrer. A stirred aqueous solution of metal salt is added dropwise to the TC solution. The stirred alcoholic solution of the secondary ligand (Sal) is also added to the above reaction mixture dropwise and refluxed in a reflux condenser. The pH is maintained by the adding ammonia solution resulting the formation of precipitate. The dried precipitate is recrystallized to obtain the amorphous form of metal complex. Furthermore, the complexes were analyzed using physical and spectral techniques. Here, the physical method includes elemental microanalysis, pH, specific conductivity, viscosity, surface tension, density, and melting point measurements. Similarly, the spectroscopic method includes FT-IR, (1H and 13C)- NMR, UV/Visible, and ESI-MS spectrometry techniques. The results obtained from the conductivity data showed both electrolytic and non-electrolytic nature, which indicates that the metal complexes are correlatively bonded to the metal ions. Also, the findings from the UV/Vis. spectra confirmed the proposed structure as well as the geometry of the metal complex.
The thermal and kinetic stability of the complex was obtained from thermo gravimetric and differential thermal analysis (TGA/DTA) techniques. The thermodynamic parameters of various decomposition steps, ∆S*, ∆H*, ∆G*, E*, A, T, can be calculated from the well-known popular Coats- Redfern equation. The results obtained from the thermal data show that the complexes have high thermal stability and also non-spontaneous nature during different decomposition steps. The spectral studies of metal complexes showed better results with the molecular formula. The SEM (Scanning electron microscope) determines the surface morphology of the compound. The complexes were further supported by the information obtained from 3D molecular modeling viz: Chem 3D pro 12.0.2 software program, which provided the theoretical predictions of the metal complexes and a better and more accurate evaluation of the proposed structure. Using the MM2 calculations, the energy optimization was repeated several times to note the minimum energy. The difference in M-N and M-O values indicates the coordination of metal ions with the ligand.
The metal complex was tested for in vitro antibacterial susceptibility by two strains of human clinical pathogenic bacteria: Staphylococcus aureus (gram-positive) and Klebsiella pneumoniae, Escherichia coli, Proteus mirabilis, and Pseudomonas aeruginosa (gram-negative). The tests were performed with the help of the well-known modified Kirby-Bauer paper disc diffusion method. Antimicrobial study results showed better results at higher concentrations and considerable activity at lower concentrations. The zone of inhibition was measured in diameter (mm) with the help of an antibiogram zone measuring scale. Here, all clinical pathogens were found to be more susceptible to the prepared derivatives of TCs. The antibacterial potency is based on the concept of Overton’s and Tweedy’s chelation principle which is related to the stability and easy permeation of the lipid layer of the organism by metal complexes.
आज, ब्याक्टेरियाहरूको प्रतिरोध उनीहरूको दुरुपयोग र एन्टिबायोटिकको अधिक मात्राको कारण हो। तसर्थ, अनुसन्धानकर्ताहरू बहु-औषधि प्रतिरोधका चुनौतीहरू समाधान गर्न सक्ने नयाँ एन्टिबायोटिकहरू पत्ता लगाउन दिनरात काम गरिरहेका छन्। हालको अध्ययनले प्राइमरी लिगान्ड, Tetracycline/Oxytetracycline (TC वा OTC), सेकेन्डरी लिगान्ड, Salicylaldehyde (Sal), र 4d-ट्रान्जिसन धातु लवणहरु [M=Cd(II), Zr(II), Mo(III)/(V), र Pd(II)] को मद्दतबाट धातु कम्प्लेक्सहरुको निर्माण गर्ने बारे बर्णन गर्दछ। प्राइमरी लिगान्ड (TC)/(OTC) को समान मोलर (molar) मिश्रणको गणना गरिएको मात्रा, 70% इथेनोलमा घुलाए पछि चुम्बकीय स्टिरर् द्वारा चलाईएको थियो। धातुको लवणको चलाईएको जलीय घोल TC को घोलमा थोपा-थोपा गरेर थपिएको थियो। सेकेन्डरी लिगान्ड (Sal) को चलाईएको अल्कोहलयुक्त घोल पनि माथिको प्रतिक्रिया मिश्रणमा थोपा-थोपा गरेर थपिएपछि रिफ्लक्स कन्डेनसरमा रिफ्लक्स गरिएको थियो। अमोनिया घोल थपेर पीएच (pH) मिलाएको परिणामस्वरूप धातु कम्प्लेक्सको गठन भएको थियो। धातु कम्प्लेक्सको घोललाई सुकाएर प्राप्त ठोसलाई शुध्द बनाउन पुन क्रिस्टलिकरण गरिएको थियो। यसपछि, कम्प्लेक्सहरूलाई भौतिक र वर्णक्रमीय प्रविधिहरू प्रयोग गरेर विश्लेषण गरिएको थियो। जसमा, भौतिक विधिमा मौलिक सूक्ष्म विश्लेषण, pH, विशिष्ट चालकता (Specific conductivity), भिस्कोसिटी (viscocity), सतह तनाव (surface tension), घनत्व (density), र पिघलने बिन्दु मापन (Melting point measurement) लगायतका समावेस छन्। त्यस्तै, स्पेक्ट्रोस्कोपिक विधिमा FT-IR, (1H र 13C)- NMR, UV/visible, र ESI-MS स्पेक्ट्रोमेट्री प्रविधिहरू समावेश छन्। चालकता डेटाबाट प्राप्त नतिजाहरूले धातु कम्प्लेक्सहरु इलेक्ट्रोलाइटिक र गैर-इलेक्ट्रोलाइटिक दुवै प्रकृतिका देखिएका थिए, जसले धातु कम्प्लेक्सहरू धातु आयनहरूसँग सहबद्ध रूपमा बाँधिएको संकेत गर्दछ। साथै, UV/Vis स्पेक्ट्राको निष्कर्षहरूले धातु कम्प्लेक्सहरुको प्रस्तावित संरचना र ज्यामितिलाई पुष्टि गर्दछ। कम्प्लेक्सको थर्मल र काइनेटिक स्थिरता थर्मो ग्रेभिमेट्रिक र विभेदक थर्मल विश्लेषण (TGA/DTA) प्रविधिहरूबाट प्राप्त गरिएको थियो। विभिन्न विघटन चरणहरूको थर्मोडायनामिक मापदण्डहरू, ∆S*, ∆H*, ∆G*, E*, A, T, प्रसिद्ध लोकप्रिय कोट्स- रेडफर्न समीकरणबाट गणना गरिएको थियो। थर्मल डाटाबाट प्राप्त नतिजाहरूले देखाउँछन् कि कम्प्लेक्सहरूमा उच्च थर्मल स्थिरता र विभिन्न विघटन चरणहरूमा गैर-स्वस्फूर्त प्रकृतिका थिए। धातु कम्प्लेक्सको वर्णक्रमीय अध्ययनले आणविक सूत्र अनुरुपको परिणाम देखाएको थियो। SEM (स्क्यानिङ इलेक्ट्रोन माइक्रोस्कोप) अध्ययनद्वारा यौगिकको सतह आकारविज्ञान निर्धारण गरिएको थियो। कम्प्लेक्सहरूको संरचनाहरुलाई 3D आणविक मोडेलिङ जस्तै: Chem 3D प्रो 12.0.2 सफ्टवेयर प्रोग्रामबाट प्राप्त जानकारीद्वारा समर्थन गरिएको थियो, जसले धातु कम्प्लेक्सहरूको सैद्धान्तिक भविष्यवाणीहरू र प्रस्तावित संरचनाको राम्रो र सटीक मूल्याङ्कन गरेको थियो। MM2 गणनाहरू प्रयोग गरेर, न्यूनतम ऊर्जा प्राप्त गर्न ऊर्जा अनुकूलनलाई धेरै पटक दोहोर्याइएको थियो। M-N र M-O मानहरूमा भिन्नताले लिगान्डसँग धातु आयनहरूको समन्वयलाई संकेत गर्दछ।
धातु कम्प्लेक्सहरूलाई मानव रोगजनक ब्याक्टेरियाका दुई प्रकारहरूद्वारा इनभिट्रो एन्टिब्याक्टेरियल संवेदनशीलताको लागि परीक्षण गरिएको थियो; जसमा, स्टेफिलोकोकस ऑरियस (ग्राम- पोजिटिभ) र क्लेब्सिएला निमोनिया, एस्चेरिचिया कोलाई, प्रोटस मिराबिलिस, र स्यूडोमोनास एरुगिनोसा (ग्राम-नेगेटिभ) ब्याक्टेरियाहरू समाबेश गरिएको थियो। प्रख्यात परिमार्जित किर्बी-बाउर पेपर डिस्क प्रसार विधिद्वारा परिक्षणहरु गरिएको थियो। एन्टिमाइक्रोबियल अध्ययन परिणामहरूले उच्च सांद्रतामा राम्रो नतिजा र कम सांद्रतामा उल्लेखनीय गतिविधि देखाएका थिए। एन्टिबायोग्राम जोन मापन स्केलको मद्दतले अवरोधको क्षेत्रको व्यास (मिमी) नापिएको थियो। यहाँ, सबै प्याथोजेनहरू TCs को तयार डेरिभेटिभहरूमा बढी संवेदनशील भएको पाइयो। जीवाणुरोधी क्षमता ओभरटन र ट्वीडीको चेलेसन सिद्धान्तको अवधारणामा आधारित छ जुन धातुको कम्प्लेक्सहरूद्वारा जीवको लिपिड तहको सहज पारगमनसँग सम्बन्धित छ।2024-02-01T00:00:00ZInvestigation of Soil corrosion to buried metallic materials of Kathmandu Valley, NepalDahal, Kumar Prasadhttps://elibrary.tucl.edu.np/handle/123456789/216212024-02-01T09:30:25Z2023-10-01T00:00:00ZTitle: Investigation of Soil corrosion to buried metallic materials of Kathmandu Valley, Nepal
Authors: Dahal, Kumar Prasad
Abstract: Metallic pipes have been utilized for long times to distribute potable water from distribution terminals to the consumers in urban cities of Nepal. However, large amounts of such potable water have been lost due to corrosion damage of such underground pipes. It is an urgent need to know the main responsible factors for such buried metallic pipeline failures, and subsequently evaluate the level of corrosion risk in the soils of Kathmandu Valley. Six soil factors (pH, moisture, resistivity, oxidation-reduction potential, chloride ion and sulfate ions) of 150 soil samples were determined using ASTM, NACE, AASHTO, and AWWA standards, The soils of Kathmandu Valley could be rated as mildly corrosive to less corrosive groups. A good positive and negative correlation coefficient between resistivity, moisture, chloride, and sulfate contents implies that these soil factors have an equal contribution to rating of soil corrosivity.
A polyethylene wrapping and use of non-conducting materials could be sufficient for the extension of their life up to 50 years or more. Furthermore, a new probabilistic corrosion failure model is proposed for the study of soil corrosivity level more precisely based on sub-corrosive group. The outputs of the present work could be very useful in the formulation and implementation strategies to control or minimize the corrosion effect of buried metallic pipes in Kathmandu Valley.
नेपालका शहरी क्षेत्रमा खानेपानी वितरणका लागि प्रयोग गरिँदै आएका फलामबाट बनेका यौगिक धातुबाट पाइपको क्षयिकरण (Corrosion) प्रक्रियाबाट त्यस्ता पाइपको क्षति भई वर्षेनी ठूलो मात्रामा खाने पानीको अभाव तथा आर्थिक क्षति हुँदै आएको कुरालाई मध्यनजर गर्दै उक्त पानी वितरण गर्ने जनिमूनी विछ्याइएका लोहाजन्य पाइपहरुको क्षयिकरण गर्ने प्रमुख कारकका रुपमा रहेका माटोको गुणहरु जस्तै पानीको मात्रा, अम्लियपन, विद्युतीय प्रतिराधोत्मक क्षमता, अक्सिडेसन–रिडक्सन क्षमता, क्लोराईड, सल्फेट जस्ता कणहरुको अन्तर्राष्ट्रिय मापदण्डहरु जस्तै ASTM, NACE र AWWA विधिहरु प्रयोग गरी विश्लेषण गर्दा काठमाडौँ उपत्यकाको माटोको क्षयिकरण तहहरु मुख्यतः निम्न तथा मध्यमस्तर रहेको विद्यावारिधी अनुसन्धानबाट पाइएको छ ।
यस किसिमका अनुसन्धान परीक्षणबाट यो अनुमान गर्न सकिन्छ कि उक्त निम्न तथा मध्यम स्तरका माटोको क्षयिकरण गुणहरुलाई अझ कम गर्नका लागि सरल र कम खर्चिलो तरिकाले बालुवाजन्य माटोका कणहरु विछ्याइएका पानीका पाइप वरिपरि प्रयोग गर्ने विधि पनि एउटा प्रभावशाली हुनेछ ।
पानीको मात्रा विद्युतीय प्रतिरोधात्मक क्षमता, क्लोराइड र सल्फेट कणहरु बीचको आपसी सम्बन्ध विश्लेषण गर्दा दुवै घनात्मक र ऋणात्मक गुणक (Positive and negative correlation coefficient) पाइएकोले माटोका यी गुणहरु क्षयिकरण वर्गीकरणका लागि समान योगदान रहेको कुरालाई संकेत गर्छ । माटो क्षयिकरणलाई सशक्त रुपमा वर्गीकरण गर्नका लागि नविनतम सम्भावित माटो क्षयिकरण मोडेल यस अध्ययनमा पेश गरिएको छ । यस अध्ययनको परिणामले माटो क्षयिकरण क्षमतालाई नियन्त्रण गर्न रणनीतिक रुपमा प्रयोग गर्न सकिने विश्वास गरिएको छ ।2023-10-01T00:00:00Z