Please use this identifier to cite or link to this item:
https://elibrary.tucl.edu.np/handle/123456789/9183
Title: | “Simulation of OFDM Signalling” |
Authors: | Nepal, Subodh |
Keywords: | Orthogonal Frequency Division multiplexing (OFDM) |
Issue Date: | Feb-2010 |
Publisher: | Pulchowk Campus |
Institute Name: | Institute of Engineering |
Level: | Masters |
Citation: | Master’s of Science in Information and Communication Engineering, |
Abstract: | The purpose of this report is to provide Matlab code to simulate the basic processing involved in the generation and reception of an OFDM signal in a physical channel and to provide a description of each of the steps involved. This report investigates the effectiveness of Orthogonal Frequency Division multiplexing (OFDM) as a modulation technique for wireless radio applications. The main aim was to access the suitability of OFDM as a modulation technique for a fixed wireless phone system for rural areas. However, its suitability for more general wireless applications is also accessed. The IEEE standardization group decided to select OFDM as the basis for their new 5-GHz standard, targeting a range of data stream from 6 up to 54 Mbps. This new standard is the first one to use OFDM in packet-based communications, while the use of OFDM until now was limited to continuous transmission systems. In this project, transmitter and receiver were simulated according to the parameters established by the standard, to evaluate the performance and different possibilities in the implementation. |
Description: | The purpose of this report is to provide Matlab code to simulate the basic processing involved in the generation and reception of an OFDM signal in a physical channel and to provide a description of each of the steps involved. |
URI: | https://elibrary.tucl.edu.np/handle/123456789/9183 |
Appears in Collections: | Electronics and Computer Engineering |
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.